Home
Back to Hard capsules

Hard capsules

Capsule Supplement Manufacturing: Shells, Filling and Quality

How to assess a capsule supplement manufacturer, check production licences and certification scopes, and compare quotes before placing an order.

Capsule manufacturing

A capsule project brings together the powder, the shell and the amount in each piece. The shell can look familiar while the filling behaves quite differently from another formula. Production records and testing help connect the label to the batch, while the sample shows how the selected material and format work together. The quotation then describes the work around that particular product.

The following sections describe how capsule formats, production responsibilities and quality information connect to the development of a particular product.

The agreed work can include formulation, raw-material sourcing, blending, encapsulation and testing, with packaging or export documentation added where required. A written scope identifies which business carries out each part, including any work assigned to a partner site.

Capsule formats

The shell affects how much powder a capsule holds, how it responds to moisture and how it disintegrates. Its material also matters if you plan to market the product as vegan.

  • Two-piece gelatin shells are a common animal-derived option. Filling and storage behaviour still depend on the shell grade and the powder.
  • HPMC shells use plant cellulose and have different moisture properties from gelatin, which can be considered with hygroscopic ingredients and the intended positioning.
  • Pullulan and starch shells provide other options. The oxygen-barrier and storage behaviour of the particular grade are assessed with the formula.
  • Enteric or delayed-release designs change release behaviour, with suitability tied to the formula and product requirements.

Capsule size and powder bulk density influence the available fill weight. The same shell size can hold different masses of different blends, so its volume does not establish one universal milligram capacity. The chosen shell and intended serving also affect artwork and stability work.

Quality documentation

A GMP statement becomes more informative when it names the standard, the audited site and the activities covered.

  • US dietary supplement cGMP requirements apply to the operations they cover, including relevant manufacturing and quality work.
  • A facility audit and a finished-product assessment can have different scopes, even when they come from the same certification body.
  • A sports product may also have an agreed third-party banned-substance testing programme, where relevant to its market and claims.
  • A product verification programme describes its own test scope and does not automatically extend to all products from that site.
  • Halal, Kosher or organic claims relate to the applicable ingredients, process and certification scope.
  • Management-system certification and lot-specific analytical results describe different aspects of quality.

The company, site, scope and validity period connect a document to a proposed order. The product’s specification and batch records then provide information about the actual work and results.

Our range includes capsules, tablets, powders and tea, with OEM and ODM cooperation. For a capsule order, the formula, destination and pack help describe the applicable production scope and quality work. The resulting documents then refer to a particular product rather than the range as a whole.

The European Commission’s food supplement overview provides another market context; an export project’s document list depends on its destination.

From formulation to a finished batch

The production sequence gives the sample and quality records a shared context. A typical project can include the stages below, with details set for its formula.

  1. Formulation and pilot work: amount, excipients, powder flow and compatibility with the shell.
  2. Material sourcing and identity: suitable methods connect incoming material to its specification.
  3. Blending: the equipment and process work together, with uniformity information describing the result.
  4. Encapsulation: the shell and powder inform the equipment choice and fill-weight control.
  5. In-process control: weights, appearance and relevant process results are recorded under the project plan.
  6. Finished testing: applicable assay and quality tests describe the agreed specification.
  7. Packing and lot identification: the finished pack connects to the batch, with sample retention arranged for the product.

Raw-material identity and finished-product tests describe different stages of the work. The agreed method and sample plan connect each result to the batch. At Wan Hua Cao, those details belong to the particular capsule specification rather than being inferred from a photograph or a general line count.

Private label, custom formulation and turnkey services

Existing formulas, custom development and an integrated service can include different work. Formula rights, permitted changes and responsibilities for sourcing or packing are set out for the particular project.

An existing formula and a custom development project can have different preparation work. The choice depends on how much of the specification is already fixed and what still needs to be developed.

Minimum orders, lead times and cost per capsule

Wan Hua Cao’s confirmed capsule starting quantity is 100,000 pieces. Formula development, shell sourcing, testing and packing can follow different schedules. The order confirmation gives the applicable timing rather than a general four- or eight-week promise.

A comparable cost can include the powder, shell, encapsulation, agreed testing, packaging and freight. Stating those parts makes the proposed scope easier to understand.

Project and quality information

  1. The manufacturing business, production site and available site review.
  2. The applicable quality system and scope documents.
  3. Raw-material and finished-product analytical reports.
  4. Fill-weight tolerance and the monitoring arrangement.
  5. The available stability work and observation period.
  6. Responsibility for label and claim review.
  7. The process for a change of material supplier.
  8. How a batch outside specification is handled.
  9. Applicable allergen, BSE/TSE and origin documentation.

These details can form a basis for the project information and quality agreement.

Frequently asked questions

What is the starting quantity for capsules?

The confirmed Wan Hua Cao minimum is 100,000 capsules. The formula, shell and pack are specified for the order.

How long does a capsule project take?

Development, material availability, testing and packaging affect the schedule. The quotation and order confirmation describe the timing for the particular specification.

Can a project use plant-derived shells?

HPMC, pullulan or starch shells can be considered for a particular project. Compatibility with the formula remains part of the sample assessment.

What does GMP documentation describe?

It identifies the applicable system and scope. US supplement operations have relevant Part 111 obligations, while a third-party certificate and a lot-specific report provide different supporting information.

How are private label and white label used?

Suppliers use the terms differently. The agreement describes the available changes, the formula rights and whether an existing product is offered to more than one brand.

A capsule project at Wan Hua Cao

A project becomes more specific as the shell, fill material and intended market are described together. The sample and quality specification then provide a common reference for the work that follows.

The current range includes hard capsules, softgels, tablets and powders. The OEM and ODM page gives the wider product context, with project details shared through the contact page.

Final Thoughts

The shell is only one part of a capsule product. The blend, fill behaviour and intended serving help describe what will go inside it, while testing and records connect that description to a batch. With those details in view, the sample and quotation can refer to the same product and give the next stage of development a shared reference.

Ding Shaohua, Foreign Trade Manager at Wan Hua Cao, works on product specifications and export documentation for Southeast Asia, Europe and North America, and answers the messages that arrive this way. He is on WhatsApp, TikTok, LinkedIn and Facebook, and sample questions usually reach him on WhatsApp first.

All News