Home
Back to Functional gummies

Functional gummies

Colostrum Gummies The IgG Is Gone Before the Mould

Bovine IgG starts to denature at 72 C and is fully denatured at 89 C. A gummy is deposited at 90 to 95 C. That single overlap decides what a colostrum gummy can claim: the powder weight is easy to print, the IgG figure needs late addition, a different gelling system, and an immunoassay on the finished piece.

A buyer asks for a colostrum gummy, 500 mg of colostrum powder per piece, and wants to know what IgG level can be printed on the front panel.

The powder is easy. 500 mg in a three gram piece is under 17 per cent load and the texture survives it. The IgG figure is where the project stops, because the temperature at which a gummy is deposited is above the temperature at which the immunoglobulin is fully denatured.

Trays of demoulded gummies on a stainless bench, one piece held in a caliper.
Trays of demoulded gummies on a stainless bench, one piece held in a caliper.

Two temperatures

Bovine colostrum's protein fractions begin to denature between 62 and 78 °C. The immunoglobulins specifically start to unfold at 72 °C and are fully denatured at 89 °C. Looked at domain by domain, the Fab fragment transitions at around 61 °C and the Fc fragment at around 71 °C, which is why the loss is gradual rather than a single cliff.

Now the other number. A pectin or gelatin gummy is deposited between 90 and 95 °C at the nozzle.

The two ranges do not overlap. A conventional gummy deposit is above the temperature at which IgG is completely denatured, and well above the temperature at which most of the activity is already gone.

The retention figures from dairy processing make the slope concrete. Low-temperature long-time pasteurisation at 63 °C for 30 minutes leaves roughly 70 to 80 per cent of IgG activity. High-temperature short-time at 72 °C for 15 seconds drops it to around 50 to 60 per cent. At 85 °C, functional IgG is close to undetectable. A gummy line runs hotter than any of these.

What late addition actually costs

The obvious answer is to add the colostrum after the cook, when the mass has cooled below the denaturation range. That works up to a point, and the point is set by the gelling system rather than by the protein.

A pectin mass begins to build structure as it cools and will set in the kettle if it is held too long below its deposition temperature. The window between "cool enough for the IgG" and "still liquid enough to deposit" is narrow, sometimes a matter of a couple of minutes on a full batch, and it is the kind of thing that runs well in a pilot and drifts in production when the kettle size changes.

There are three practical routes, and they are not equivalent:

  • Cool the batch to 68 to 70 °C and deposit immediately. Partial retention, tight timing, and a piece that must be checked for both assay and texture on every batch.
  • Cold-set or starch-moulded system. Deposit below 60 °C, accept a slower cycle, a different texture and a mould room instead of a belt.
  • Print the colostrum, not the IgG. Declare the powder weight, make no immunoglobulin claim, and treat the powder as a protein ingredient rather than a bioactive.

The third is what most of the market does, and it is defensible as long as the pack does not promise an IgG number. The first two are what a product claiming IgG has to do, and both of them cost more per piece than the brief usually assumes.

The arithmetic of an IgG claim

Colostrum powder is not IgG. Standard spray-dried colostrum powder runs around 20 to 25 per cent IgG; an ultrafiltered concentrate can reach 50 per cent and above, with protein at 80 per cent.

So a 500 mg colostrum powder load at 22 per cent IgG is 110 mg of IgG per piece, before any process loss. Two pieces a day gets to about 220 mg, which is in the range the published gut studies used — those tended to work at grams of powder per day rather than milligrams of IgG.

If the brief asks for 200 mg of IgG per serving, the piece needs around 900 mg of standard powder or 400 mg of concentrate. The first is 30 per cent of a three gram piece and will not hold a gummy texture. The second is feasible, and it is the reason a concentrate costs what it costs.

The distinction that matters commercially: a pack that says "500 mg colostrum" is making a weight declaration; a pack that says "100 mg IgG" is making a compositional claim that has to survive the process and the shelf life. The second one requires a test at the end, and the test is not the same as a protein assay.

Testing protein is not testing IgG

Total protein by Kjeldahl or by combustion will pass a piece in which the immunoglobulins have been cooked into random coils, because denatured protein is still protein. The nitrogen is all still there.

IgG is measured by immunoassay — radial immunodiffusion or ELISA — and the result depends on the antibody still being in a conformation the reagent can bind. That is exactly the property heat destroys, which makes the assay both the right test and the inconvenient one.

For a gummy, the test has to be run on the finished piece, not on the incoming powder. An incoming certificate showing 22 per cent IgG says what was bought; it says nothing about what survived the depositor. A project that intends to print an IgG figure needs the finished-piece method validated before the first commercial batch, not after.

There is a second analytical trap. Colostrum powder is a mixture, and the IgG fraction in a finished gummy sits alongside gelatin — which is also a protein, and in a gelatin-based gummy is present at a far higher concentration than the colostrum. Any method that measures "protein" or that is not specific to bovine IgG will read the gel base as well.

Milk on the label, twice

Colostrum is a dairy ingredient. In the EU it falls under the allergen labelling rules for milk, and the "contains milk" statement is mandatory regardless of how much of the protein has been denatured — allergen declaration is about the source, not about the folded state.

That creates an awkward combination with the vegan positioning that many gummy brands use as their default. A colostrum gummy cannot be vegan, cannot be dairy-free, and cannot be made on a line that is being presented as dairy-free without a cleaning validation that stands up to scrutiny.

The protein also changes the process. Colostrum powder is hygroscopic and it foams when it is dispersed, which matters when it is being folded into a syrup late in the process and the air it brings in has nowhere to go before the deposit.

Colour, smell and the Maillard reaction

Colostrum powder is cream to light tan and it carries a dairy smell that reads as "milk" in a neutral base and as "off" in a fruit base. Most colostrum gummies are therefore vanilla, caramel or unflavoured, because those are the profiles where the ingredient's own note is an asset.

The browning question is separate and more serious. Colostrum brings lactose and protein into the same piece, and a gummy is processed hot and stored for a year with residual moisture. That is the condition set for the Maillard reaction, and it shows up as a colour drift toward tan and a flavour drift toward cooked milk. It is slower in a low-water-activity piece and faster in a syrup-based one, which is one more argument for the polyol or low-aw route.

What a 500 kg batch settles

Five hundred kilograms at three grams is about 166,000 pieces. At 500 mg of colostrum powder per piece the batch needs 83 kg of powder.

If the powder is the standard 22 per cent IgG grade, the batch carries about 18 kg of IgG on paper. What is in the piece after the deposit is a different number, and the only way to know it is to measure it. That gap — between the paper figure and the piece — is the entire technical content of a colostrum gummy project, and it is settled at the deposit temperature, not at the purchase order.

The order also has to name the powder grade, because "colostrum powder" covers everything from 15 per cent protein to an 80 per cent protein concentrate, and the price difference between those two is larger than the price difference between most finished products.

For buyers comparing formats, the functional gummies line is where piece weight and heat-sensitive loads are set together. The assay side is described under gummy quality control testing, and the moisture and shelf-life side under gummy shelf life and stability.

Ding Shaohua, Foreign Trade Manager at WANHUACAO, works with brands and distributors on functional gummy programmes from brief to first shipment, in bulk and in private label, including protein and dairy-derived formulas. The plant operates under SGS CN23/00007035 for gel confectionery and SC11434160205012 covering eight dosage forms, sports nutrition supplements among them. Reach him on WhatsApp, TikTok, LinkedIn and Facebook.

FAQ

Does a colostrum gummy contain any active IgG?

It depends entirely on the deposit temperature. IgG starts to denature at 72 °C and is fully denatured at 89 °C, and a conventional gummy is deposited at 90 to 95 °C. Late addition below 70 °C retains part of it; a standard deposit retains effectively none.

Can the pack print an IgG figure?

Only if the finished piece is tested for IgG by immunoassay and the figure is set from that data. A total protein test will pass a piece whose immunoglobulins have been fully denatured, because denatured protein still contains nitrogen.

How much colostrum powder fits in a gummy?

500 mg in a three gram piece is comfortable; 900 mg, which is what 200 mg of IgG needs from a standard 22 per cent powder, is not. A concentrate at 50 per cent IgG gets the same IgG into 400 mg of powder, which is the route a higher claim has to take.

Is a colostrum gummy suitable for a dairy-free line?

No. Colostrum is a dairy ingredient and the milk allergen declaration is mandatory regardless of protein state. Running it on a line presented as dairy-free requires a cleaning validation, not just a wash-down.

Why do colostrum gummies brown over shelf life?

The powder brings lactose and protein into the same piece, and a warm process plus residual moisture is the condition for the Maillard reaction. It shows as a colour shift toward tan and a flavour shift toward cooked milk, and a lower water activity slows it.

All News