Home
Back to Manufacturing guides

Manufacturing guides

Six Clauses in a Supplement Manufacturing Contract

Most first projects start with a purchase order, a spec sheet and a price that holds thirty days. Six things are missing, and each becomes expensive later: the minimum and its steps, how long a price holds, who can change a specification, exclusivity, who pays for a recall, and how the contract ends.

Most first supplement projects start with a purchase order, a specification sheet and an email that says the price holds for thirty days. That package is not a contract, and the six things that later become expensive are all missing from it.

A dietary supplement contract manufacturer agreement can be twelve pages or forty. The length matters less than whether it answers six questions in writing, because every one of them gets answered eventually, and the only choice is whether the answer is negotiated or imposed.

A caliper checking a demoulded piece on a tray, the kind of check a quality agreement has to define.
A caliper checking a demoulded piece on a tray, the kind of check a quality agreement has to define.

Two documents, not one

The commercial side and the quality side are usually separate documents, and both are needed.

A supply agreement covers quantity, price, delivery, payment and term. A quality agreement covers specifications, test methods, sampling, deviation handling, change control, audit rights and recall procedure. The second one is the one startups skip, because it looks like it belongs to a bigger company with a quality department.

It does not. A quality agreement is what turns "we will meet the specification" into a description of who tests what, against which method, and what happens when a result is out. Without it, the specification is a wish and the certificate of analysis is a claim.

Clause one: the minimum and its steps

The minimum order quantity is the number that decides whether a first project is viable, and a single figure is not enough.

A workable clause gives a first-order minimum, a reorder minimum that is lower, and a schedule of step-downs as annual volume is demonstrated. The reason is manufacturing reality rather than generosity: a small batch carries the same cleaning, setup, documentation and testing cost as a large one, so the cost per unit falls steeply and then flattens.

Two details matter more than the headline number. Is the minimum expressed in finished units or in batch mass, because a three gram piece and a five gram piece at the same kilogram minimum are different commercial propositions. And does the minimum apply per SKU or per order, because three flavours at one minimum each is a very different commitment from three flavours sharing one.

Clause two: how long a price holds

A price is a statement about raw materials on a date. The clause decides what happens when they move.

The three common structures are a fixed price for a stated period, a price tied to a named material index with a review trigger, and a price reviewed at each order. Each is defensible. What causes disputes is silence, or a fixed period that is shorter than the production lead time, which means the price has expired before the material is bought.

A clause worth having names the review interval, the threshold that triggers a review, and the evidence that supports a change. A quotation that moves with an unnamed "market rate" is not a mechanism, it is a conversation.

Clause three: who can change a specification

Specifications drift. A supplier discontinues a grade, a carrier changes, an assay method is updated. The clause decides whether the brand learns about it before or after the batch.

Change control should require written notice before implementation, a description of the change and its effect on the finished product, and an approval from the brand where the change touches an ingredient, a claim or a test method. A supplier that can substitute a carrier at its own discretion has effectively taken over the formula.

The mirror clause is on the brand's side. If the brand wants a different flavour or a different active level, that is a new batch, a new specification and often a new stability clock, and the agreement should say who pays for the restart.

Clause four: exclusivity and the formula

Two separate questions that are often written as one.

Ownership is who holds the rights to the formulation, which is settled in the development agreement rather than the supply agreement. Exclusivity is whether the manufacturer may make the same or a substantially similar product for someone else.

A manufacturer will usually resist broad exclusivity, and reasonably: a category it makes for six brands is its business. What is negotiable is a narrow exclusivity tied to the brand's specific formula, a defined market and a volume commitment. A brand asking for category exclusivity without a volume commitment is asking for a restriction it is not paying for.

The practical drafting point is the definition of "same". A formula defined by ingredient list alone is easy to work around by changing one excipient. A formula defined by ingredient list, ratios and the process window is much harder to copy, and that definition is also what makes the exclusivity worth having.

Clause five: deviation, recall and who pays

This is the clause nobody reads until it matters, and it is the one that decides how a bad month is shared.

It should cover four situations. A batch that fails a specification before release, where the question is who bears the cost of rework or disposal. A batch that passes release and fails later, where the question is whether the cause is manufacturing or storage. A customer complaint that requires an investigation. And a recall, where the costs run from retrieval to destruction to the brand's own communications.

The usual structure allocates cost according to cause, with the manufacturer bearing rework and replacement where the deviation is theirs, and the brand bearing market-side costs where the issue is a claim, a label or handling. That structure only works if the investigation is documented, which is why the quality agreement needs to describe how a deviation is opened, investigated and closed, and how long records are kept.

Clause six: ending it

A contract that says nothing about ending is a contract that ends badly.

The clauses that matter are notice period, the treatment of work in progress, the last-time buy, and the fate of the technical package. A brand leaving a manufacturer needs its specifications, methods, artwork files and retained samples; a manufacturer needs a reasonable window to close open orders and consume committed material.

Capacity deserves a line as well. If the brand has forecast growth, the agreement should say whether capacity is reserved, at what volume, and with what notice. Otherwise the second year's peak arrives in a queue behind someone else's.

What a startup should pay before the first sale

Three costs arrive before any revenue, and they are worth budgeting deliberately rather than discovering.

Development or formula adaptation, if the product is not from a catalogue. A trial or pilot batch, which is a real batch with real material and real documentation, and is where process problems surface most cheaply. And stability testing, which runs for months and is often bought as a package with the first commercial batch.

The pilot stage is the one startups most often try to skip, and it is the one that pays for itself. A small run that exposes a texture problem, a filling tolerance or a label issue costs a fraction of the same discovery inside a commercial batch. The sequencing of those runs is covered in moving from pilot to mass production, and the formulation side in contract R&D.

The single most useful thing a first-time buyer can do is ask for the quality agreement before signing the supply agreement. A supplier that has one ready is a supplier that has been through this before. The production scope those documents are governing is set out in our note on contract manufacturing.

Ding Shaohua, Foreign Trade Manager at WANHUACAO, works with brands and distributors on supplement programmes from brief to first shipment, in bulk and in private label, across gummies, capsules, powders and tea. The plant operates under SGS CN23/00007035 for gel confectionery and SC11434160205012 covering eight dosage forms, sports nutrition supplements among them. Reach him on WhatsApp, TikTok, LinkedIn and Facebook.

FAQ

Is a purchase order enough to start production?

It is enough to start, and not enough to finish well. A purchase order fixes quantity and price for one shipment; it does not describe who tests what, what happens when a result is out of specification, or what the brand is entitled to if it wants to move. The quality agreement is the document that covers the second and third.

What should a supplement manufacturer for startups offer on minimum order?

A first-order minimum, a lower reorder minimum, and a path down as volume proves out. A single fixed minimum with no step-down is a sign the supplier has not thought about small brands, or has decided not to serve them. It is also worth asking whether the minimum is per SKU, since three flavours can triple a commitment that looked reasonable.

Who owns the batch records?

The manufacturer holds them, because the records are part of the evidence that it operated correctly and it is required to retain them for a defined period. The brand is entitled to copies relevant to its product, and the agreement should say what form those copies take and how quickly they are provided.

Can I change the formula after the first batch?

Yes, and it is a new project rather than an edit. A different active level, a different carrier or a different flavour changes the specification, usually the stability study, and sometimes the process window. Agreeing in advance who pays for that restart is cheaper than negotiating it while a batch is on hold.

All News