Walk down any tea aisle and the word sleep is on a dozen cartons. On the back of those cartons, in the small print a regulator reads, nobody claims the tea makes anyone sleep. The gap is where the constraints start. Three things decide what a chamomile sleep tea can be, and the claim comes first.
They are connected. A claim decides which regulatory route the product takes, and the route decides what you may print. The oil decides whether the cup smells like chamomile at all. The dose decides whether the sachet is a product or a gesture.

Sleep is a word the label cannot use
Under Regulation (EC) No 1924/2006, health claims on food need authorisation, and the authorised list contains one entry that concerns sleep: melatonin, at 1 mg per serving, for the reduction of time to fall asleep. Chamomile is not on the list, and it is not waiting to be added.
The herbal monograph position makes the same point from a different direction. The European Medicines Agency has a traditional-use monograph for lavender flower that includes aid to sleep among its indications. The monograph for chamomile flower does not: its traditional indications are minor gastrointestinal complaints and minor skin inflammation. The plant that the tea aisle treats as the sleep herb has no sleep indication in the European herbal framework at all.
That does not stop a product being called chamomile sleep tea, or bedtime tea, or a night-time blend. A name can describe an occasion, a blend or a flavour. What it cannot do is carry a sentence on the pack that attributes a physiological effect. Once a product is presented as treating or preventing insomnia, it moves towards the definition of a medicinal product by function under Directive 2001/83/EC, and the obligations change completely. In the United States the same sentence turns a conventional food into a drug.
So the workable position for a brand is narrower than the shelf suggests: the name and the blend carry the promise, the label carries the ingredients, and the sleep association sits in the occasion rather than in a claim.
The oil leaves before the water does
Most of what makes chamomile chamomile is volatile. The blue tint of a good essential oil comes from chamazulene, formed from matricin during distillation; the characteristic soft, apple-like note comes largely from α-bisabolol and related sesquiterpenes, with spiroethers contributing the hay-like edge.
Those compounds are what a drying and sterilisation regime damages first. Drying above roughly 40 to 50 °C drives off a measurable share of the volatile fraction, and the flower darkens as it goes. A gently dried flower keeps its colour and its smell and carries a higher microbial load, which then has to be dealt with downstream.
That downstream step is where most of the aroma is lost. Saturated steam is the usual choice for herbs because it leaves no residue, but steam at sterilising temperature is exactly the condition that strips volatiles from a thin-petalled flower. Ethylene oxide is not an option in the European Union: its use for food sterilisation has been prohibited since 1991. Irradiation works and is permitted, but the pack then has to be labelled as treated with ionising radiation, which few premium brands will accept.
The result is that two lots from the same grower, processed by two suppliers, do not smell the same. A buyer tasting the first shipment and reordering on that basis is comparing against a memory rather than a specification.
Whole flower or cut, and what it costs
Chamomile is bought either as whole flower heads or cut to a few millimetres. The choice is a trade between aroma retention and how the material behaves on a filling line.
Whole heads keep the volatile oil inside the plant tissue for longer and look convincing through a mesh. They are also bulky, bridge easily in a feeder and limit how much material fits in a sachet of a given size.
Cut material flows evenly, fills to a tighter weight and releases its oil faster in the cup, including into the air of the filling room. Fine dust created by cutting can also pass through the mesh and cloud the infusion, which a consumer reads as a dirty cup even when it is only plant powder.
For a sleep blend the practical answer is usually a cut chamomile with a sieve specification that keeps the fines out, blended with whole-leaf components that carry the aroma the cut material lost.

What a 1.5 gram sachet puts in the cup
Apigenin is the flavonoid most often attached to chamomile's reputation. In the plant it exists largely as glycosides, notably apigenin-7-O-glucoside, which are more water-soluble than the free aglycone. What reaches the cup therefore depends on the glycoside content of the flower, the cut size, the water temperature and the steep time, and it is measured in milligrams per cup.
That is the arithmetic a product brief has to survive. A sleep blend rarely uses chamomile alone. A typical composition puts chamomile at a third to a half of the fill, with lemon balm, passionflower, linden or verbena making up the rest, and valerian appearing in small amounts where the brand wants it. Valerian brings a strong, earthy note that has to be masked, usually with lemongrass or a little peppermint, and masking it costs fill weight that could have gone to chamomile.
A stronger cup, then, is a sensory result. Two blends can taste equally convincing with different chamomile loads, and the one that smells better may carry less of the flower the customer thought they were buying.
The contaminant that rides along
Chamomile is harvested as a flower head from a field, and the field contains other plants. The contaminant that matters most is pyrrolizidine alkaloid from weeds such as coltsfoot or groundsel harvested with the crop, because the alkaloids survive drying and are not removed by brewing.
EU Regulation 2023/915 sets the limit for dried herbs at 200 µg/kg for the general category, with a separate and higher figure for specified herbs and mixtures made only of them. A chamomile lot is tested against the general figure, and the result belongs to the lot rather than to the supplier's reputation.
The same logic applies to pesticide residues, heavy metals and microbial load. Each is a lot-level result, and each changes when the grower, the harvest or the drying site changes. That is why a certificate covering the plant says nothing about the container in front of you.
Where contract manufacturing changes the answer
All three constraints are decisions taken before a single sachet is filled, which is why two quotations for the same chamomile sleep tea can describe different products.
A sleep tea manufacturer quoting on capacity alone will answer the question that was asked. A contract manufacturing partner working as a CDMO has to answer three others first: which claim route the product will take, which sterilisation the flower can survive, and what fill weight the blend needs to taste like chamomile. Those three answers set the specification, and the specification sets the price.
The route into the project does not change the questions. A brand that starts from a private label catalogue, an OEM brief with its own percentages, or an ODM selection from a development file arrives at the same three decisions, only at different points in the calendar.
A herbal tea contract manufacturer and a CDMO are described by the hashtags this trade uses, #contractmanufacturing and #CDMO, and the difference between them shows up in what each one signs off on. Contract manufacturing is the line and the people who run it. The development and documentation side is what turns a blend that smells right into a product that can be labelled, tested and repeated.
For the site-audit questions (mixers, fill tolerance, the lot numbers that have to join up), see private label herbal tea manufacturers. Residue limits that change with the commodity rather than the plant are set out in tea extract pesticide residues. The bagged range sits on the herbal tea page.
Ding Shaohua, Foreign Trade Manager at WANHUACAO, works with brands on herbal tea and sleep blends from brief to first shipment. Blending and bagging run in the same plant, under SGS CN23/00007035 covering herbal tea among other categories and SC11434160205012 covering eight dosage forms. Reach him on WhatsApp, TikTok, LinkedIn and Facebook.
FAQ
Can chamomile tea be sold as a sleep aid in the EU?
Not with a health claim. The authorised list under Regulation 1924/2006 contains melatonin for reduction of time to fall asleep, and chamomile is not on it. The product can be named and blended around the occasion, but a sentence on the pack that attributes a sleep effect moves it towards the medicinal product definition.
Does steam sterilisation change the taste?
Yes, and it is the largest single loss in the process. Steam at sterilising temperature strips volatiles from a thin-petalled flower, which is why a gently dried lot and a sterilised lot of the same chamomile do not smell alike. Irradiation is permitted in the EU but requires an on-pack statement, and ethylene oxide has been prohibited for food since 1991.
How much chamomile is in a sleep blend?
Commonly a third to a half of the fill, with lemon balm, passionflower, linden or verbena making up the rest. Valerian, where it is used, brings a strong earthy note that has to be masked, and the masking material takes fill weight away from chamomile.
What does a sleep tea manufacturer need before quoting?
Three decisions: the claim route, the sterilisation the flower can survive, and the fill weight the blend needs. A quotation that arrives without those settled is priced against an assumption, and the assumption is usually the cheaper one.
